The best waterproof boots come rain or shine – InsideHook | Gmx Pharm

Nota bene: If you buy from the links in this article, InsideHook may earn a small portion of the profits.

There was a time when you could have waterproof boots that would keep you dry, but their inability to shed heat meant your feet would sweat when the weather warmed up and the water went away. Then there was waterresistant Boots that didn’t hold out the elements very well when encountering snow or excessive moisture.

Thankfully, advances in technology have given us boots that breathe and feel lighter on our feet while remaining fully waterproof. The comfort level of these enduring trekkers has also increased, making your excursion along the Appalachian Trail or the Esplanade even more enjoyable in one of the hiking shoes listed below.


A blend of a lightweight trail runner and the stability of a mid-cut hiking shoe, the Adidas Terrex AX4 is designed to tackle hikes, climbs and scramble trails. Stream crossings and wet trails can be part of your exploration thanks to a waterproof Gore-Tex mesh and synthetic upper that keeps your feet dry. The AX4’s Continental outsole also means you can go anywhere without worrying about losing your footing.

Made from Primegreen high-performance recycled materials, the upper is half recycled material instead of pure polyester. The AX4 has a lace-up closure, molded sockliner and dual-density EVA midsole. While some shoppers recommended going up a half size, I felt my normal size was fine. Shown in Core Black/Carbon/Grey, other color combinations are available. The AX4’s light weight makes it a great all-day shoe, with a profile that’s narrower than a hiking boot.


A waterproof hiking boot for extreme adventures, Xero’s Xcursion Fusion is a slimmer, more robust version of their original boot. With its 10mm sole, double chevron profile with 3.5mm lugs and an embedded layer of TrailFoam for added comfort and protection, the Xcursion Fusion offers more grip and control without sacrificing the desired ground feel and feedback.

Tight-fitting huarache-inspired straps resist abrasion. A protective toe cap, a seam-sealed inner lining and a water-repellent membrane support the mesh outer material. A wider toe box allows your toes to splay, with a zero-drop heel for proper posture, a low ground clearance for balance and agility, and a sole that flexes, moves and flexes. At 13.2 ounces each, the Fusion is a good boot for backpacking, camping, or hiking. Available in black and earth tones, the Xcursion is tough enough for tough trails, yet stylish enough to pair with jeans or other casual wear.


Black Diamond’s Mission Leather Mid is the boot to wear when you’re feeling adventurous. Ankle padding provides extra support on rocky terrain. The waterproof, breathable lining and leather upper will keep you dry when traversing water, and a climbing forefoot and toe cap are useful on steep berms. High-traction lugs offer plenty of grip, as does a reinforced, padded tongue for comfort while keeping dirt and debris out. An EVA midsole is stiff and precise when climbing steep mountain routes.

A sticky rubber heel welt and toe cap provide foot protection and abrasion resistance. High traction lugs are great in mud, increasing climbing ability and confidence in soft terrain. A heel brake and midfoot shank make via ferrata comfortable (an activity between rock climbing and scrambling where you clip into a rail bolted to the mountain and use it as a safety line). There is also intentional seam placement to minimize stress from wear and tear.


The Union boot is a mix of tough and lightweight. A Vibram XS Trek outsole with a PU midsole provides excellent grip and balance, making me feel at home on wet or dry terrain. The waterproof lining with its antimicrobial treatment gives you even more motivation to keep going and traversing the stream. Did I mention comfort? A removable Ortholite X-25 footbed felt great right out of the box, with cushioning that lasted all day.

Available in three different colors, the waterproof suede and highly abrasion-resistant nylon upper makes the Union as good-looking as it is durable. There is a new 3D molded rubber toe cap that offers extra protection and wear resistance. It’s a great lightweight boot that is well built, fits snugly and can be worn all day without causing fatigue.


KEEN took the fit of the Targhee Hiker, combined it with their Bellows Flex technology and reduced the energy required for each step by 60%, a worthwhile effort for any hiking shoe. Traction is provided by multidirectional lugs and an all-terrain rubber outsole, support by a stability shank and heel counter system, and a snug fit by Speed ​​Lace webbing. A non-marking rubber tip provides durability and protection.

The Ridge’s waterproof, PFC-free, breathable membrane uses eco-friendly LWG-certified premium leather and features natural Eco Anti-odor odor control. The compression molded EVA midsole provides cushioning, and there’s a quick-dry lining and removable sockliner for long-lasting comfort. Ready for anything with KEEN waterproof protection and all-terrain traction for a better grip on a variety of surfaces, the Ridge weighs 19 ounces and is true to size. I like the look of the Ridge as much as its fit and functionality.


At 28 ounces, Danner’s Pacific Crest Trail 2650 hits the slight sweet spot. The suede and textile upper with Gore-Tex lining keeps water out and allows sweat and moisture to escape. A removable polyurethane footbed supports heat dissipation and air circulation. The EVA midsole (ethylene vinyl acetate, a plastic made by mixing ethylene and vinyl acetate) also helps to save weight. Vibram’s 460 outsole offers excellent wet or dry grip and durable durability. Danner’s TPU (thermoplastic polyurethane) shank is strong, supportive, lightweight and protective, even on rough terrain.

The fit of the Trail 2650 is excellent, with an 8mm offset to allow for a little more room in the toe box. They were a pleasure to wear for days as inspiration for these boots came from trail running shoes. Its 4-inch mid-rise is supportive, not restrictive, and the design doesn’t hinder you in activities that take place far from the trail.


When you open the box you will be pleased with what you see. The Mountain Trainer 2, Salewa’s best-selling next generation alpine trekking shoe, combines a 1.6mm suede upper and Gore-Tex weather protection with a 360° full protection rubber collar. Rands are the rubber on the side of the boot that wraps under the sole, the basis for gluing the rubber outsole to the shoe. This results in a strong, seamless and lightweight connection between the suede upper and the Vibram sole.

A waterproof, breathable Gore-Tex membrane has been incorporated for weather protection and breathability, keeping your feet dry and comfortable even during high-intensity activities. The dual-density PU midsole balances cushioning and stiffness to cope with steep terrain and flat terrain. Salewa combines support with flexibility and stability, and an outsole that improves grip and traction in a variety of conditions.

Leave a Comment